Using Menu Options; Director Menu - HP StorageWorks 2/140 - Director Switch Product Manager Manual

Monitoring and Managing the Director
The following displays in this dialog box:
• Director name, description, location, and contact configured through the
Configure Identification dialog box.
• Fibre Channel World Wide Name (WWN) identifier for the director.
• Product type number.
• Product model number.
• Product manufacturer.
• Product serial number.
• Engineering change (EC) level.
• Firmware level.
• Operating Mode. Open Systems or S/390 mode.
• Preferred Domain ID. This is set using the Configure Switch Parameters dialog
box.
• Active Domain ID. The actual domain ID assigned to the director.
• Director Speed (Director 2/64 only). This is set using the Configure Switch
Parameters dialog box and is either 1 Gb/sec or 2 Gb/sec.
NOTE: The director model and firmware may not support 2 Gb/sec data speeds.
• Switch Binding. Enabled if the optional SANtegrity features are installed and
enabled, otherwise Disabled displays.
NOTE: You can also display the Director Properties dialog box when you right-click the
director illustration away from a FRU and choose Properties from the menu.

Using Menu Options

Right-click various parts of the Hardware View to display menu options for
displaying status and information and for controlling the director and its FRUs.

Director Menu

Right-click any area of the director illustration where a hardware component is not
installed to display the following menu options:
2–10 director product manager user guide