Configuring Feature Key; Configure Feature Key Dialog Box - HP StorageWorks 2/140 - Director Switch Product Manager Manual

Configuring the Director

Configuring Feature Key

A feature key is a string of alphanumeric characters consisting of both uppercase and
lowercase. The following is an example of a feature key format:
XxXx-XXxX-xxXX-xX.
NOTE: The total number of characters may vary. The key is case sensitive and must be entered
exactly, including the dashes.
The feature key, which is encoded with a director's serial number, can only be
configured on the director to which it is assigned.
To enable an optional feature on the director, first set the director offline, then enter
the feature key into the New Feature Key dialog box.
Display this dialog box by selecting Feature from the Configure menu on the menu
bar.
FICON Management Server Feature: If you are enabling the FICON Management
Server feature, the operating mode automatically configures to S/390 mode. You
cannot change the operating mode to open systems mode with the FICON
Management Server feature is enabled.
To configure a feature key, use the following steps:
1. Set the director offline using the Set Online State dialog box.
a. Choose Maintenance > Set Online State from the Product Manager
window. The Set Online State dialog box displays.
b. Click Set Offline. A warning box displays asking you to confirm the offline
state.
c. Click OK.
2. Choose Configure > Features from the Product Manager window. The
Configure Feature Key dialog box displays, as shown in
Figure 3–11: Configure Feature Key dialog box
3. Click New to add a new feature key. The New Feature Key dialog box displays,
as shown in
3–24
Figure 3–12.
Figure 3–11.
director product manager user guide