HP StorageWorks 2/140 - Director Switch Product Manager Manual page 40

Product Manager Overview
operation is interrupted during the IPL. Refer to the hp StorageWorks director
2/64 service manual or hp StorageWorks director 2/140 service manual for more
information.
• Set Online State—Choose this option to display the Set Online State dialog box.
Use this dialog box to change the online state of the director to offline or online.
• Firmware Library—Choose this option to display the Firmware Library dialog
box. This dialog box displays all firmware versions currently installed on the
HAFM server that can be downloaded to directors. Use this dialog box to add a
new firmware version to the HAFM server hard disk, modify the description
displayed for an existing version, delete a version from the PC, or download
(send) a version for operation on a director. For additional information on using
this option, refer to the hp StorageWorks director 2/64 service manual or hp
StorageWorks director 2/140 service manual.
• Enable E-Mail Notification—The Simple Mail Transfer Protocol (SMTP) server
and e-mail recipient addresses are configured in the HAFM application (not in the
Director's Product Manager). E-mail notification is also initially enabled in the
HAFM for all directors managed by the HAFM. Note, however, that the E-Mail
Notification option on the Product Manager's Maintenance menu must be
enabled (checked) for e-mail notification to occur for the specific director.
The default setting for the Enable E-Mail Notification function is enabled
(checked). To disable the function, choose Enable E-Mail Notification from the
Maintenance menu to clear the check box. For additional information on using
this option, refer to
• Enable Call Home Notification—Choose Enable Call Home Notification from
the Maintenance menu to enable the call-home function for the director.
For directors and switches installed in some legacy environments, call-home
notification requires installation of HP Proactive Service software. This service is
offered at no additional charge for subsystems covered under an on-site warranty
or on-site storage hardware support contract. To register or order Proactive
Service software, contact your HP customer service representative.
NOTE: The default setting for the Enable Call Home Notification function is disabled
(unchecked).
• Backup & Restore Configuration—Choose this option to save the product
configuration stored on the director to the HAFM server hard disk or to restore the
product configuration from the HAFM server. Only a single copy of the
configuration is kept on the server.
1–22
"Enable E-Mail Notification" on page 5–5.
director product manager user guide