Configure Menu - HP StorageWorks 2/140 - Director Switch Product Manager Manual

you click the check box to remove the check mark, unit beaconing is disabled and
the amber LED goes out. You can only enable beaconing if there are no system
errors (the system error light is off).
Properties
Click to display the Director Properties dialog box. This dialog box contains the
director name, description, location, and contact person configured through the
Configure Identification dialog box. Also included is other product information
as detailed in Director Properties. You can also display this dialog box when you
double-click an area on the illustration in the Hardware View, away from a
hardware component.
Close
Choose this option to close the Product Manager window.

Configure Menu

Click the Configure menu on the menu bar to display a menu that lists the following
options. For detailed information on using these dialog boxes, refer to
"Configuring the
• Identification—Choose this option to display the Configure Identification
dialog box. Enter the following information in this dialog box:
— Name—Assign a product name. Note that you can set this name as the
nickname for the director's WWN, using the Set Name As Nickname check
box. The nickname then displays instead of the WWN in Product Manager
views.
— Description—Assign a unique product description.
— Location—Describe the product's location.
— Contact—Assign a contact either by name, phone number, or e-mail address.
NOTE: This information displays in the identification table at the top of the Hardware View
and in the HAFM application Product View, if the Product View is configured to display
names.
• Switch Operating Parameters—Choose this option to display the Configure
Switch Parameters dialog box for setting Fibre Channel operating parameters. In
this dialog box, you can set the preferred domain identification (1 to 31), and also
make it insistent if SANtegrity feature is installed. You can also enable rerouting
delay, and domain register for state change notifications (RSCNs). In addition,
director product manager user guide
Director."
Product Manager Overview
Chapter 3,
1–17