Notes; Collect Maintenance Data; Swap Ports Dialog Box - HP StorageWorks 2/140 - Director Switch Product Manager Manual

Using Maintenance Features
Figure 5–1: Swap Ports dialog box
2. Enter the first address (in hexadecimal format).
3. If you want to unblock the port, choose Unblock after swap option. Note that
ports are automatically blocked during the swap process.
4. Enter the second address (in hexadecimal format).
5. If you want to unblock the port, choose Unblock after swap option.
6. Click Next to continue.
7. Follow the on-screen instructions and click Next to continue through to the next
screen.
8. If you are finished configuring the director, back up the configuration data. For
more information, refer to

Notes

• Make sure that the system administrator varies devices offline that are attached to
the ports whose addresses you are going to swap.
• Ports that you are going to swap are blocked during this procedure, as swapping
ports is disruptive to port operation.

Collect Maintenance Data

The Data Collection option enables you to collect maintenance data that can help
support personnel diagnose system problems. Save the maintenance data as a zip file
on a Zip disk (or other medium with the appropriate capacity), and forward it to
technical support personnel.
5–2
"Backup and Restore Configuration" on page
director product manager user guide
5–6.