HP StorageWorks 2/140 - Director Switch Product Manager Manual page 207

Table A–1: Product Manager Messages (Continued)
Message
This feature is not
installed. Please
contact your sales
representative.
The optical
transceiver is not
installed.
This feature has not
been installed.
Please contact your
sales
representative.
This feature key
does not include all
of the features
currently installed
and cannot be
activated while the
switch is online.
This feature key
does not include all
of the features
currently installed.
Do you want to
continue with
feature key
activation?
director product manager user guide
Description
This feature is not
supported in this
software version.
The maximum
number of saved
address
configurations has
been reached.
Indicator that the
feature has not been
installed on this
switch.
The feature set
currently installed for
this system contains
features that are not
being installed with
the new feature key.
To activate the new
feature key, you must
set the switch offline.
Activating the new
feature set, however,
will remove current
features not in the
new feature set.
The feature set
currently installed for
this system contains
features that are not
being installed with
the new feature key.
Information and Error Messages
Action
Contact your sales
representative.
Delete configurations no
longer needed to allow new
configurations to be saved.
Contact your sales
representative to obtain the
desired feature.
Set the switch offline through
the Set Online State dialog
box, then activate the new
feature key using the
Configure Feature Key
dialog box.
Click Yes to activate the
feature key and remove
current features not in the
new feature set or No to
cancel.
A–29