MISCELLANEOUS COMMANDS
17–18
The port mirroring commands are shown below. Refer to Chapter 9 - Port Mirroring and
Setup for additional details.
•
help port-mirror
•
: enables/disables port mirroring functionality
prtmr
•
: defines the port mirroring ports
setport
The port security commands are shown below. Refer to Chapter 6 - Securing Access for
additional details.
•
: sets the action type of secured port
action
•
: allows MAC addressing per port
allow
•
help port-security
•
: enables/disables security for a single port or group of ports
learn
•
: enables/disables security in system
ps
•
: removes MAC addressing per port
remove
•
: sets the signal type of the secured port
signal
The quality of service (QoS) commands are shown below. Refer to Chapter 14 - QoS
Overview for additional details.
•
help qos
•
: configures QOS configuration usage
setqos
•
set-untag
•
: sets the port priority weights for all the ports in all the device
set-weight
•
show-portweight
The remote monitoring (RMON) commands are shown below. Refer to Chapter 16 -
Configuring RMON for additional details.
•
: sets the owner for the alarm group
alarm
•
: sets the owner for the event group
event
•
help rmon
: sets the owner for the history group
•
history
•
: sets the owner for the statistics group
statistics
The Rapid Spanning Tree Protocol (RSTP) commands are shown below. Refer to Chapter 13
- Rapid Spanning Tree Protocol for additional details.
•
: sets the path cost of ports
cost
•
: set the force version of STP
forceversion
•
help rstp
•
lll
•
: sets the RSTP administration status of ports
port
•
: changes the priority of ports or bridge
priority
•
: changes the RSTP administrative status of the bridge
rstp
•
show-forceversion
•
: shows the port mode status
show-mode
•
: shows the bridge time parameters
show-timers
•
: changes the bridge time parameters
timers
CHAPTER 17: MISCELLANEOUS COMMANDS
: displays the current port weight priority
: shows the current force version of RSTP
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL