Enervista Example - GE MultiLink ML1200 Instruction Manual

MISCELLANEOUS COMMANDS

17.7.3 EnerVista Example

17–12
Event logs can be exported to a ftp or a tftp server on the network for further analysis. The
CLI command is used to facilitate the export of the event log
exportlog mode=<serial|tftp|ftp> <ipaddress> file=<name> doctype=<raw|html>
Where is the mode of transfer,
mode
is the filename, and
file doctype
HTML file.
Please ensure the proper extension is used for the
an HTML file).
exportlog mode=tftp 192.168.5.2 file=eventlog
ML1200#
doctype=html
Do you wish to export the event logs? [ 'Y' or 'N'] Y
Successfully uploaded the event log file.
exportlog mode=tftp 192.168.5.2 file=eventlog.txt
ML1200#
doctype=raw
Do you wish to export the event logs? [ 'Y' or 'N'] Y
Successfully uploaded the event log file.
The EnerVista Secure Web Management software provides and overview of the type of
Logs by reviewing the statistics. Each specific log can be viewed by viewing the logs menu.
To view the log statistics,
Select the Configuration > Statistics > Log Statistics menu item.
The Log Statistics window displays the logged events received – most logs are typically
informational and activity.
The log buffer size can be controlled through this menu.
CHAPTER 17: MISCELLANEOUS COMMANDS
is the IP address of the ftp or TFTP server,
ipaddress
indicates the log is saved as a text file (raw) or as an
argument (for example, "html" for
file
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL