GE MultiLink ML1200 Instruction Manual page 266

SNMP
16–12
The following window illustrates changes to the SNMP community parameters. It is
recommended to change the community strings from the default values of public and
private to other values.
When done changing the community strings, click OK.
Multiple managers can be added as shown below.
When adding SNMP manager stations, click on the Add button on the
SNMP menu screen.
Make sure that each station can be pinged from the switch by using the
Configuration > Ping menu.
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
CHAPTER 16: SNMP