Example - GE MultiLink ML1200 Instruction Manual

CHAPTER 17: MISCELLANEOUS COMMANDS

17.1.3 Example

Note
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
The command deletes the specific
delete
the traps via e-mail. The
id
delete id=<1-5>
The command customizes (and also sends a test e-mail to check SMTP settings)
sendmail
the e-mail delivered by specifying the e-mail subject field, server address, to field and the
body of the text. See the example in this section for details.
sendmail server=<ip-addr> to=<email-addr> from=<email-addr> subject=<string>
body=<string>
The command configures the global SMTP server settings.
server
server ip=<ip-addr> [port=<1-65535>] [retry=<0-3>] [domain=<domain>]
For this command, represents the SMTP server IP address,
ip
for SMTP communications (default is 25), and
error occurs when sending e-mail (from 0 to 3 with default of 0).
The parameter specifies the domain name of the SMTP server.
optional domain
The following example shows how to set SMTP to receive SNMP trap information via e-mail.
E-mail alerts can be forwarded to be received by other devices such as cellphones and
pages. Most interfaces to SMTP are already provided by the service provider.
specified. The deleted
id
is added using the command
add
specifies how many times to retry if an
retry
MISCELLANEOUS COMMANDS
no longer receives
id
the TCP port to be used
port
17–3