GE MultiLink ML1200 Instruction Manual page 101

CHAPTER 5: IP ADDRESSING
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
Here is a list of the modules and related settings that can be selected not to default back to
factory default settings.
Name
System IP Configuration, Boot mode
User Users settings (e.g. login names, passwords)
Port settings, Broadcast Protection and QoS
Port
settings
STP/RSTP STP, RSTP settings
Port-Security Port Security settings
Port-Mirror Port Mirror settings
VLAN Port/Tag VLAN settings
ACCESS IP-Access and Host Table settings
IGMP IGMP Settings
LACP LACP settings
Kill Config option using CLI
This command is a "hidden command"; that is, the on-line help and other help functions
normally do not display this command. The syntax for this command is:
kill Config
or
kill config save=module command
The kill Config command will default all the Switch settings back to factory defaults, while
the kill config save=module will default all with the exception of module selected.
Available modules are: system, user, acces, port, vlan, ps, mirror, lacp, slp, and igmp.
Areas affected
IP ADDRESSING
5–29