GE MultiLink ML1200 Instruction Manual page 287

CHAPTER 17: MISCELLANEOUS COMMANDS
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
•
portaccess
•
reauth
•
setport
•
show-port
•
show-stats
•
trigger-reauth
The device commands are shown below.
•
device
•
backpressure
•
broadcast-protect
•
flowcontrol
•
rate-threshold
• : sets the mgtagetime
setage
• : sets the port configuration
setport
The VLAN registration over GARP (GVRP) commands are shown below. Refer to Chapter 11 -
VLAN Registration over GARP for details.
•
gvrp
• : configures GVRP parameters for dynamic VLAN
help gvrp
• : sets forbidden ports for a tag-based VLAN
set-forbid
• : show ports current GVRP state
show-ports
• : show forbidden ports for tag-based VLAN
show-forbid
• : set GVRP port state usage
set-ports
• : shows dynamic/static tag-based VLANs
show-vlan
• : convert dynamic VLAN to static VLAN
static
The IGMP commands are shown below. Refer to Chapter 15 - IGMP for additional details.
•
mcast
• : enables or disables IGMP immediate leave status
set-leave
• : sets the port mode
set-port
• : sets the query interval (60 to 127) for router ports
set-qi
•
set-qri
• : enables or disables switch as querier
set-querier
• : displays IGMP group list
show-group
• : displays IGMP port mode
show-port
• : displays IGMP router list
show-router
The Link Aggregation Control Protocol (LACP) commands are shown below.
•
lacp
•
add port
•
del port
•
edit port
: enables or disables broadcast storm protection globally
: sets the broadcast rate threshold (frames/sec)
MISCELLANEOUS COMMANDS
17–17