GE MultiLink ML1200 Instruction Manual page 222

RAPID SPANNING TREE PROTOCOL
13–14
romode <enable|disable>
romode show
The sequence of commands for enabling ring-only mode is shown in the following
example:
Example 13-5: Configuring smart RSTP, ring-only mode
rstp
ML1200#
rstp enable
ML1200(rstp)##
Successfully set the RSTP status
romode show
ML1200(rstp)##
RO-MODE status
RO-MODE set on ports : NONE
romode add port=1,2
ML1200(rstp)##
Added Ports: 1,2
romode enable
ML1200(rstp)##
RSTP Ring Only Mode Enabled.
romode show
ML1200(rstp)##
RO-MODE status
RO-MODE set on ports : 1,2
romode disable
ML1200(rstp)##
RSTP Ring Only Mode Disabled.
romode show
ML1200(rstp)##
RO-MODE status
RO-MODE set on ports : 1,2
CHAPTER 13: RAPID SPANNING TREE PROTOCOL
: Disabled
: Enabled
: Disabled
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL