CHAPTER 17: MISCELLANEOUS COMMANDS
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
The Simple Mail Transfer Protocol (SMTP) commands for e-mail are shown below. Refer to
Chapter 17 - E-mail for additional details.
•
: adds a recipient
add
•
: deletes a recipient
delete
•
help smtp
•
: sends e-mail
sendmail
•
: sets the global SMTP server configuration
server
•
: enables/disables SMTP e-mail alert
smtp
The Simple Network Management Protocol (SNMP) commands are shown below. Refer to
Chapter 16 - SNMP for additional details.
•
: enable/disables the authentication traps
authentraps
•
: configures SNMP community names
community
•
help snmp
•
: adds or deletes the SNMP manager IP
mgrip
•
: configures system name, contact, or location
setvar
•
: adds or deletes a trap receiver
traps
The Simple Network Time Protocol (SNTP) commands are shown below. Refer to Chapter 5 -
Network Time for additional details.
•
: deletes the SNTP server from SNTP server database
delete
•
help sntp
•
: adds SNTP server into the SNTP server database
setsntp
•
: configures parameters for SNTP system
sntp
•
: sets the interval for synchronization time with an NTP server
sync
The Spanning Tree Protocol (STP) commands are shown below. Refer to Chapter 12 -
Spanning Tree Protocol (STP) for additional details.
•
cost
•
lll
•
port
•
priority
•
s-ring
•
stp
•
timers
The user commands are shown below.
•
: adds a new user
add
•
: changes the user access permissions
chlevel
•
: deletes an existing user
delete
•
help user
•
: change the user password
passwd
•
tacplus
•
tacserver
•
useraccess
MISCELLANEOUS COMMANDS
17–19