Setting The Cng Detection Times In The Fax/Telephone Auto Select Mode; Setting The Dis Signal To 4 Bytes; Setting The Short Protocol Transmission; Setting The Reception Of A Short Protocol Transmission - Kyocera FS-1128MFP Service Manual

2JN
Maintenance
item No.
Setting communication control 3
U632
Description
Makes settings for fax transmission regarding the communication.
Start
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Display
DIS 4BYTE
SHORT PRTCL TX
SHORT PRTCL RX
NUM OF CNG(F/T)

Setting the DIS signal to 4 bytes

Sets if bit 33 and later bits of the DIS/DTC signal are sent.
1. Select the setting using the cursor up/down keys.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set.

Setting the short protocol transmission

Sets if short protocol transmission is performed.
1. Select the setting using the cursor up/down keys.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set.

Setting the reception of a short protocol transmission

Selects whether to receive or ignore transmission using short protocol.
If a short protocol transmission is received when an auto switching device is attached to the machine, commu-
nication problems, including auto switching inability, sometimes occur. Change the setting to ignore short pro-
tocol transmission to prevent such problems.
1. Select the setting using the cursor up/down keys.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set.

Setting the CNG detection times in the fax/telephone auto select mode

Sets the CNG detection times in the fax/telephone auto select mode.
1. Select the setting using the cursor up/down keys.
Display
1TIME
2TIMES
Initial setting: 2TIMES
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-56
Description
Description
Sets the DIS signal to 4 bytes.
Sets the short protocol transmission.
Sets the reception of short protocol transmission.
Sets the CNG detection times in the fax/telephone auto select mode.
Description
Bit 33 and later bits of the DIS/DTC signal are not sent.
Bit 33 and later bits of the DIS/DTC signal are sent.
Description
Short protocol transmission is performed.
Short protocol transmission is not performed.
Description
Receives short protocol transmission.
Ignores short protocol transmission.
Description
Detects CNG once.
Detects CNG twice.