Kyocera FS-1128MFP Service Manual page 71

Maintenance
item No.
Adjusting margins for scanning an original from the DP
U404
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect when the optional DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
U402
(P.1-3-41)
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
Display
A MARGIN
B MARGIN
C MARGIN
D MARGIN
3. Press the system menu/counter key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu/counter key.
6. Change the setting value using the cursor left/right keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U403
U404
(P.1-3-42)
Description
Left margin
Leading edge margin
Right margin
Trailing edge margin
DP left margin
(2.0±1.0 mm)
DP trailing edge margin
(2.0±1.0 mm)
Description
Setting
range
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
DP leading edge margin
(3.0±1.5 mm)
DP right margin
(2.0±1.0 mm)
Figure 1-3-16
Initial Change in
setting value per step
3.0 0.5 mm
2.5 0.5 mm
3.0 0.5 mm
4.0 0.5 mm
1-3-43
2JN