Kyocera FS-1128MFP Service Manual page 65

Maintenance
item No.
Setting the destination
U252
Description
Switches the operations and screens of the machine according to the destination.
Purpose
To be executed after initializing the backup RAM, in order to return the setting to the value before replacement
or initialization.
Setting
1. Press the start key.
2. Select the destination using the cursor up/down keys.
Display
INCH
EUROPE METRIC
ASIA PACIFIC
AUSTRALIA
CHINA
3. Press the start key. The setting is set.
4. After turning the main power switch off, wait a while and turn it on.
(If fax is not detected, try turning the main power switch on and off again.)
Supplement
The specified initial settings are provided according to the destinations in the maintenance items below. To
change the initial settings in those items, be sure to run maintenance item U021 after changing the destina-
tion.
Initial setting according to the destinations
Maintenance
item No.
253
Switching between double and single counts
U253
Description
Switches the count system for the total counter and other counters.
Purpose
Used to select, according to the preference of the user (copy service provider), if folio size paper is to be
counted as one sheet (single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the count system using the cursor up/down keys.
Display
SGL COUNT(ALL)
DBL COUNT(FOLIO)
Initial setting: DBL COUNT(FOLIO)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Inch (North America) specifications
Metric (Europe) specifications
Metric (Asia Pacific) specifications
Australia specifications
China specifications
Title
Switching between double and single
counts
Description
Single count for all size paper
Double count for Folio size or larger
Description
Japan
Single
Inch Europe Metric,
Asia Pacific
Double Double
2JN-1
1-3-37