Kyocera FS-1128MFP Service Manual page 70

2JN
Maintenance
item No.
Adjusting margins for scanning an original on the platen
U403
Description
Adjusts margins for scanning the original on the platen.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
Display
A MARGIN
B MARGIN
C MARGIN
D MARGIN
3. Press the system menu/counter key.
4. Place an original and press the start key to make a test copy.
5. Press the system menu/counter key.
6. Change the setting value using the cursor left/right keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U403
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-42
Description
Scanner left margin
Scanner leading edge margin
Scanner right margin
Scanner trailing edge margin
Scanner
left margin
(2.5+1.5/-2.0 mm)
Scanner trailing edge margin
(3.0±2.0 mm)
U404
(P.1-3-43)
Description
Setting
range
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
Scanner leading edge margin
(3.0±2.5 mm)
Scanner
right margin
(2.5+1.5/-2.0 mm)
Figure 1-3-15
Initial Change in
setting value per step
2.0 0.5 mm
2.0 0.5 mm
2.0 0.5 mm
5.0 0.5 mm