Scan To Ftp Error Codes - Kyocera FS-1128MFP Service Manual

2JN

(2) Scan to FTP error codes

Code Display
1101 Error: Host name
1102 Error: User/Password
1103 Error: Pathname or File
Name
1105 Error: Not support protocol
2101 Error: Can not connect
2102 Error: Can not connect with
timeout
2103 Error: Response wait with
timeout
2201 Error: Network transfer
2202 Error: Network transfer with
timeout
2203 Error: Response wait with
timeout
3101 Error: Server response
9181 Error: Page max count over
1-4-32
Causes
Enter the disable host name/
IP address.
Domain name is not entered.
Assign disable user/pass-
word.
Connect to the folder which is
not permitted for reference/
writing.
Assign disable folder path.
FTP Protocol is set to OFF.
Enter the disable host name/
IP address.
Assign the wrong port num-
ber.
Network is not connected.
The server is unable to com-
municate.
Send the server which does
not support FTP server.
The server is unable to com-
municate.
Error occurs on the network.
Error occurs on the network.
Response is not returned
from the server above speci-
fied time.
The server is error status.
The number of pages of a
send file exceeded 999
pages.
Remarks
Check procedures/corrective measures
Enter the correct host name or IP address.
Enter the user name with the form of either
[Domain¥User] or [Domain/User].
Enter the correct user name/password.
Enter correct user name/password.
Check the access limit of destination folder.
Enter correct folder path.
Check ON in the [Scanner]-[FTP] screen in
COMMAND CENTER.
Enter the correct host name or IP address.
Enter the correct port number.
Check if the server is operating properly.
Check the network connection (cable. net-
work condition within LAN, etc.).
Check if the server is operating properly.
Enter the correct host name or IP address.
Check if the server is operating properly.
Check the network connection (cable. net-
work condition within LAN, etc.).
Check the network connection (cable. net-
work condition within LAN, etc.).
Check the network connection (cable. net-
work condition within LAN, etc.).
Check if the server is working properly.
Set the number of pages as 999 or less.