Kyocera FS-1128MFP Service Manual page 92

2JN-2
Maintenance
item No.
Setting for a PBX
U660
Selects the mode to connect an outside call when connected to a PBX.
(cont.)
According to the type of the PBX connected, select the mode to connect an outside call.
1. Select the setting using the cursor up/down keys.
Display
EARTH
FLASH
LOOP
Initial setting: LOOP
2. Press the start key. The setting is set.
Setting the loop current detection before dialing
Sets if the loop current detection is performed before dialing.
1. Select the setting using the cursor up/down keys.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Outputting lists
U670
Description
Outputs a list of data regarding fax transmissions.
Printing a list is disabled either when a job is remaining in the buffer or when [Pause All Print Jobs] is pressed
to halt printing.
Purpose
To check conditions of use, settings and transmission procedures of the fax.
Method
1. Press the start key.
2. Select the item to be output using the cursor up/down keys.
3. Press the start key. The selected list is output.
Display
SETTING LIST
ACTION LIST
SELF ST REPORT
PROTOCOL LIST
ERROR LIST
ADDR BOOK(No.)
ADDR BOOK(Name)
ONE-TOUCH LIST
GROUP LIST
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-64
Description
Description
Earth mode
Flashing mode
Code number mode
Description
Performs loop current detection before dialing.
Does not perform loop current detection before dialing.
Description
Outputs a list of software switches, self telephone number, confiden-
tial boxes, ROM versions and other information.
Outputs a list of error history, transmission line details and other infor-
mation.
Outputs a list of settings in maintenance mode (own-status report)
regarding fax transmission only.
Outputs a list of transmission procedures.
Outputs a list of error.
Outputs address book in order IDs were added
Outputs address book in order of names
Outputs a list of one-touch.
Outputs a list of group.