(4) Detaching and refitting the scanner PWB
Procedure
1. Remove the right cover (See page 1-5-3).
2. Remove six connectors and the FFC from
the scanner PWB.
3. Remove four screws and then remove the
scanner PWB.
4. Check or replace the scanner PWB and refit
all the removed parts.
NOTE:
When the replacing the scanner PWB, per-
form following maintenance modes.
1. U425 Setting the target (see page 1-3-46)
2. U411 Adjusting the scanner automatically
(see page 1-3-45)
YC103
YC102
Connectors
Scanner PWB
YC104
YC108
YC105
FFC
Scanner PWB
Figure 1-5-74
Screws
Screws
Figure 1-5-75
2JN-1
YC109
YC101
Scanner PWB
1-5-49