Kyocera FS-1128MFP Service Manual page 102

2JN
Maintenance
item No.
Outputting a VTC-PG pattern
U993
Description
Selects and outputs a VTC-PG pattern created in the machine.
Purpose
When performing respective image printing adjustments, used to check the machine status apart from that of
the scanner with a non-scanned output VTC-PG pattern.
Method
1. Press the start key.
2. Select the VTC-PG pattern to be output using the cursor up/down keys.
Display
PG1
PG2
3. Press the system menu/counter key.
4. Press the start key. A VTC-PG pattern is output.
5. To return to the screen for selecting an item, press the system menu/counter key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-74
Description
PG pattern to be output Purpose
Leading edge registration adjust-
ment
Center line adjustment
Margin adjustment
Lateral squareness adjustment
Magnification adjustment