Kyocera FS-1128MFP Service Manual page 45

Maintenance
item No.
Adjusting the shading position
U063
Description
Changes the shading position of the scanner.
Purpose
Used when white lines continue to appear longitudinally on the image after the shading plate is cleaned. This
is due to flaws or stains inside the shading plate. To prevent this problem, the shading position should be
changed so that shading is possible without being affected by the flaws or stains.
Method
1. Press the start key.
2. Change the setting using the cursor left/right keys or numeric keys.
Description
Shading position
Increasing the setting moves the shading position toward the machine left, and decreasing it moves the
position toward the machine right.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu/counter key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Setting range Initial setting
-32 to 20 0
Change in value per step
0.086 mm
2JN
1-3-17