Kyocera FS-1128MFP Service Manual page 200

2JN
17. Check or replace the high voltage PWB and
refit all the removed parts.
When refitting the high voltage PWB, be
careful about following points.
- Position the ground plate so that it is atop
the high voltage PWB.
- Each interface is firmly in contact with each
spring.
- The bias contact pin must be installed in
the specified position.
- The cassette pin must be inserted in the
cassette pin holder.
1-5-48
High voltage PWB
Grounding
plate
Spring
(Transfer)
Spring
(Main charger)
Bias
contact pin
Cassette
pin
Spring
(Developing)
Figure 1-5-73
High voltage PWB
High voltage
PWB
Cassette pin holder