Kyocera FS-1128MFP Service Manual page 37

Maintenance
item No.
Exiting the maintenance mode
U001
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
Setting the factory default data
U002
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport (position in which the frame can be fixed).
Method
1. Press the start key.
2. Select [MODE1(ALL)] using the cursor up/down keys.
3. Press the start key.
The mirror frame of the scanner returns to the position for transport.
4. Turn the main power switch off and on.
An error code is displayed in case of an initialization error. Refer to the table of the error codes on P.1-3-10.
When errors occurred, turn main power switch off then on, and execute initialization using maintenance
item U002.
Displaying the machine number
U004
Description
Displays the machine number.
Purpose
To check the machine number.
Method
Press the start key. The currently machine number is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Displaying the ROM version
U019
Description
Displays the part number of the ROM fitted to each PWB.
Purpose
To check the part number or to decide, if the newest version of ROM is installed.
Method
1. Press the start key. The ROM version are displayed.
2. Change the screen using the cursor up/down keys.
Display
MAIN
MMI
ENGINE
ENGINE BOOT
CASS 2
CASS 3
SCANNER
SCANNER BOOT
OPTION LANGUAGE
FAX BOOT
FAX APL
FAX IPL
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Control PWB ROM
Operation panel PWB ROM
Engine ROM
Engine booting
Optional paper feeder main PWB ROM
Optional paper feeder main PWB ROM
Scanner PWB ROM
Scanner PWB booting
Optional language ROM
FAX PWB booting
FAX PWB APL
FAX PWB IPL
2JN-2
1-3-9