Kyocera FS-1128MFP Service Manual page 79

Maintenance
item No.
U610 1. Change the setting using the cursor left/right keys or numeric keys.
(cont.)
Description
Number of lines to be ignored when receiv-
ing a fax (A4R, letter) in the auto reduction
mode
Increase the setting if a page received in the reduction mode is over-reduced and too much trailing
edge margin is left. Decrease it if the received image does not include all transmitted data.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting system 2
U611
Description
Sets the number of adjustment lines for automatic reduction.
Start
1. Press the start key. The current setting is displayed in each item.
2. Select the item to be set using the cursor up/down keys.
Display
ADJ LINES
ADJ LINES (A4)
ADJ LINES (LT)
Setting the number of adjustment lines for automatic reduction
Sets the number of adjustment lines for automatic reduction.
1. Change the setting using the cursor left/right keys or numeric keys.
Description
Number of adjustment lines for automatic reduction
2. Press the start key. The value is set.
Setting the number of adjustment lines for automatic reduction when A4 paper is set
Sets the number of adjustment lines for automatic reduction when A4 paper is set.
1. Change the setting using the cursor left/right keys or numeric keys.
Description
Number of adjustment lines for automatic reduction
when A4 paper is set
2. Press the start key. The value is set.
Setting the number of adjustment lines for automatic reduction when letter size paper is set
Sets the number of adjustment lines for automatic reduction when letter size paper is set.
1. Change the setting using the cursor left/right keys or numeric keys.
Description
Number of adjustment lines for automatic reduction
when letter size paper is set
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Setting range
0 to 22
Description
Sets the number of adjustment lines for automatic reduction.
Sets the number of adjustment lines for automatic reduction when A4
paper is set.
Sets the number of adjustment lines for automatic reduction when let-
ter size paper is set.
Initial setting Change in value
per step
0 16 lines
Setting range Initial setting
0 to 22 7
Setting range Initial setting
0 to 22 22
Setting range Initial setting
0 to 26 26
2JN
1-3-51