Printer Settings; Printing Reports/Sending Notice - Kyocera FS-1128MFP Service Manual

(6) Printer Settings

Emuration Set
1. Select [Emuration Set.] using the cursor up/down
keys.
2. Press the OK key.
3. Select the printer you want to emulate.
4. Press the OK key.
When KPDL Is Selected for Emulation
1. Select [Emuration Set.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [KPDL] and press the OK key.
4. Select [Off] or [On].
5. Press the OK key.
When KPDL(Auto) Is Selected for Emulation
1. Select [Emuration Set.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [KPDL(Auto)] and press the OK key.
4. Select the printer for alternative emulation.
5. Press the OK key.
6. Select [Off] or [On].
7. Press the OK key.
EcoPrint
1. Select [EcoPrint] using the cursor up/down keys.
2. Press the OK key.
3. Select [Off] or [On].
4. Press the OK key.
Override A4/LTR
1. Select [Override A4/LTR] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Off] or [On].
4. Press the OK key.
Duplex
1. Select [Duplex] using the cursor up/down keys.
2. Press the OK key.
3. Select [Off], [Bind Long Edge] or [Bind Short Edge].
4. Press the OK key.
Copies
1. Select [Copies] using the cursor up/down keys.
2. Press the OK key.
3. Set the default number of copies.
4. Press the OK key.
Orientation
1. Select [Orientation] using the cursor up/down keys.
2. Press the OK key.
3. Select [Portrait] or [Landscape].
4. Press the OK key.
FormFeed Timeout
1. Select [FormFeed Timeout] using the cursor up/
down keys.
2. Press the OK key.
3. Set the Form Feed Timeout.
4. Press the OK key.
LF Action
1. Select [LF Action] using the cursor up/down keys.
2. Press the OK key.
3. Select [LF Only], [LF and CR] or [Ignore LF].
4. Press the OK key.
CR Action
1. Select [CR Action] using the cursor up/down keys.
2. Press the OK key.
3. Select [CR Only], [LF and CR] or [Ignore CR].
4. Press the OK key.
Paper Feed Mode
1. Select [Paper Feed Mode] using the cursor up/
down keys.
2. Press the OK key.
3. Select [Auto] or [Fixed].
4. Press the OK key.

(7) Printing Reports/Sending Notice

Printing Reports
1. Select [Report Print] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Menu Map], [Status Page] or [Font List].
4. Press the OK key.
5. Select [Yes].
The selected report is output.
Send Result Report
1. Select [Result Rpt Set.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Send Result] using the cursor up/down
keys.
4. Press the OK key.
5. Select [E-mail/Folder] using the cursor up/down
keys.
6. Select [Off], [On] or [Error Only].
7. Press the OK key.
2JN
1-3-81