Setting The V.34 Symbol Speed (3429 Hz); Setting The Number Of Times Of Dis Signal Reception - Kyocera FS-1128MFP Service Manual

Maintenance
item No.
Setting communication control 4
U633
Description
Makes settings for fax transmission regarding the communication.
Purpose
To reduce transmission errors when a low quality line is used.
Start
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Display
V.34
V.34-3429Hz
DIS 2RES
RTN CHECK
Enabling/disabling V.34 communication
Sets whether V.34 communication is enabled/disabled for transmission and reception.
1. Select the setting using the cursor up/down keys.
Display Display
ON ON
TX TX
RX RX
OFF OFF
Initial setting: ON
2. Press the start key. The setting is set.

Setting the V.34 symbol speed (3429 Hz)

Sets if the V.34 symbol speed 3429 Hz is used.
1. Select the setting using the cursor up/down keys.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set.

Setting the number of times of DIS signal reception

Sets the number of times to receive the DIS signal to once or twice. Used as one of the correction measures
for transmission errors and other problems.
1. Select the setting using the cursor up/down keys.
Display
ONCE
TWICE
Initial setting: ONCE
2. Press the start key. The setting is set.
Description
Description
Enables or disables V.34 communication.
Sets the V.34 symbol speed (3429 Hz).
Sets the number of times of DIS signal reception.
Sets the reference for RTN signal output.
Description Description
V.34 communication is enabled for both transmission and reception. V.34 communication is enabled for both transmission and reception.
V.34 communication is enabled for transmission only. V.34 communication is enabled for transmission only.
V.34 communication is enabled for reception only. V.34 communication is enabled for reception only.
V.34 communication is disabled for both transmission and reception. V.34 communication is disabled for both transmission and reception.
Description
V.34 symbol speed 3429 Hz is used.
V.34 symbol speed 3429 Hz is not used.
Description
Responds to the first signal.
Responds to the second signal.
2JN
1-3-57