Editing The Station List; Printing The Station List - Furuno FELCOM 12 Operator's Manual

Editing the station list

1. Press [F8], [9] and [1] to display the Station List.
File Edit Transmit EGC
Setup
Configuration
Station Name
abc
01
02 xyz
03 Seagull
04
05
06
07
08
2. Press [ ] and [Enter] to select the station you want to edit.
3. Press [Enter] to open the station name window.
4. To delete a station, press [Backspace] to erase station name, and
then press [Enter].
5. To edit a station name, place the cursor on the character you want
to edit. Press [Backspace] to erase that character, then enter cor-
rect character.
6. Press [Enter] to save changes.
7. If necessary, select other item, edit it and press [Enter].
8. To return to the standby display, press [Esc] four times.

Printing the station list

1. Press [F8], [9] and [1] to display the Station List.
2. While pressing and holding down [Ctrl], press [P].
Station List ( Printed at 97-08-04 02:38 )
No. Name Type
01 abc E-Mail
02 xyz E-Mail
03 Seagull TELEX
Station Name
Figure 2-43 Sample station list printout
3. To return to the standby display, press [Esc] three times.
Reports Logs Options
Station List
Type Code, ID / Address
E-Mail abc@ furuno.co.jp
E-Mail xyz@ furuno.co.jp
TELEX 584 463609999
Figure 2-42 Station list
Dest, ID, Modem / Address
abc@ furuno.co.jp
xyz@ furuno.co.jp
584 463609999
Subscriber s Number
Country Code
Setup Position StopAlarm
Ctrl+P: print
Remarks
2-25