Station List Operations; Programming The Station List - Furuno FELCOM 12 Operator's Manual

Station List Operations

2-22

Programming the station list

The FELCOM 12 provides an "address book" for programming 64
station IDs.
1. Press [F8] to display the Setup menu.
2. Press [9] to display the Configuration menu.
3. Press [1] to display the Station List.
File Edit Transmit EGC
Setup
Configuration
Station Name
abc
01
xyz
02
03 Seagull
04
05
06
07
08
Figure 2-39 Sample station list
4. Operate [ ] to place the cursor on a blank line.
5. Press [Enter].
Station Name
Destination Type
Prefix Code
Country Code
Station ID
Modem Type
E-Mail Address
Remarks
Erase the Name to delete this station.
Figure 2-40 Entering a station
6. Press [Enter] to open the window for station name entry.
7. Enter name of station, using up to 15 characters.
8. Press [Enter] to close the window.
9. Press [ ] to send the cursor to the Destination Type line.
Reports Logs Options
Station List
Type Code, ID / Address
E-Mail abc@ furuno.co.jp
E-Mail xyz@ furuno.co.jp
TELEX 584 463609999
TELEX
Setup Position StopAlarm
Ctrl+P: print