Automatic Printing Of Display Log - Furuno FELCOM 12 Operator's Manual

display log description
S/R:
Message No.:
Type:
Pri:
Date:
Time:
LES:
Station:
Size:
Cond:
Success:
Fail:
Rejected:

Automatic printing of display log

The Display Log can be automatically printed every 24 hours.
1. Press [F8] to display the Setup menu.
2. Press [6] to display the Auto Mode Setup menu.
Figure 4-38 Auto mode setup menu
3. Press [Enter] to open the selection window of Auto Log Print.
4. Set Auto Log Print to ON.
5. Press [Enter] to close the selection window.
6. Press [Esc] twice.
Send or Receive message
Message no. or file name
Currently, TELEX, PSTN, PSDN or SPEC
(2-digit code service).
Normal or distress
Date message was received (or transmitted).
Time message was received (or transmitted).
ID of LES which handled the message
Transmitting station name. Blank for unreg
istered station or receive message.
Size of message in bytes
Transmission results. Blank if receive
message.
Successful transmission
Failed transmission
Message rejected by LES
Setup
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Telex Msg Save
Auto EGC Msg Save
Data Report & Polling Print
7. E-Mail Setup
8. Directories
9. Configuration
OFF
ON
ON
OFF
ON
4-27