File Operations; Preparing A Message; Preparing A Routine Message - Furuno FELCOM 12 Operator's Manual

Preparing a Message

This chapter describes how to prepare, edit, save and print files (mes-
sages).
There are two types of files: routine and confidential.
Messages can be assigned a file name and saved to a floppy disk for
later use. A message may contain maximum 124 254 characters (32
Kbytes).

Preparing a routine message

1. Press [F1] to display the File menu.
File Edit Transmit EGC
File
1. New ALT-N
2. Open ALT-O
3. Close ALT-Q
4. Save ALT-S
5. Delete ALT-D
6. Rename
7. Print ALT-P
8. Format Disk
9. MIME (Decode)
2. Press [1] to select New. The display should now look something
like Figure 3-2.
File Edit Transmit EGC
0001|t
Cursor can be a square or an underline.
---- * ---------+---------+---------+---------+---------+---------+---------<
ASCII 1 Char.
Figure 3-2 Text editor screen

FILE OPERATIONS

Reports Logs Options
Figure 3-1 File menu
Reports Logs Options
<[1] UNTITLED1>
[ Line 1/ 1 Col.
Setup Position StopAlarm
Setup Position StopAlarm
1 ] [Insert ]
3-1