The 2-Digit Code Services - Furuno FELCOM 12 Operator's Manual

The 2-digit code services

A range of special safety and general maritime services, known as
the 2-digit code services, may be received. The list on the next page
shows the 2-digit code services available.
To access a 2-digit code service;
1. Using the text editor, prepare message requesting a 2-digit code
service. (Refer to next page.)
2. Press [F3] to display the Transmit menu.
3. Press [Enter] to display the Transmit Message.
File Edit Transmit EGC
Transmit
0001|t 1. Transmit Message
2. Cancel
Priority
3. Request Delivery Status
Message File
Station Name
Destination Type
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
---- * ---------+---------+---------+---------+---------+---------+---------<
Subject
25 Char.
Attach File
LES ID
Option
[ TRANSMIT ]
Figure 4-26 Transmit message menu
4. Press [ ] three times to place the cursor on the Destination Type
line.
5. Press [Enter] to open the selection window.
6. Select "SPEC" (Special).
7. Press [Enter] to close the selection window.
8. Press [ ] to place the cursor on the Station ID line.
9. Press [Enter] to open the window for station ID entry.
10. Key in 2-digit code referring to the tables on the next page.
11. Press [Enter] to close the window.
Reports Logs Options
<[1] UNTITLED1>
Transmit Message
Normal
Message now being edited
TELEX
[ Line 2/ 2 Col.
Setup Position StopAlarm
Size 24
[Insert ]
1 ]
4-17