Editor Menu Setup - Furuno FELCOM 12 Operator's Manual

When the recipient receives a message with both addressee code and
password, he must enter the password to view contents of the mes-
sage.

Editor menu setup

The Editor menu sets the parameters of the text editor.
1. Press [F8] to display the Setup menu.
2. Press [3] to display the Editor Setup menu.
File Edit Transmit EGC
Setup
Editor Setup
2. System Setup Text Mode Ascii
Edit Mode Insert
3. Editor Setup
Word Wrap ON
4. Terminal Setup
Line No. ON
5. EGC Setup
6. Auto Mode Setup Tab Width 4 Char
Column Width 69
7. E-Mail Setup
Cursor Type Block
8. Directories
9. Configuration Scroll Full Screen
Current State: IDLE
DCE Ver **
Figure 3-5 Editor setup menu
3. Figure 3-5 shows the default editor setup settings. To change set-
tings, select item with arrow keys, press [Enter] to open selection
window, and select settings with arrow keys. After selecting set-
tings, press [Enter].
Select "Telex" or "ASCII".
Text Mode:
Edit Mode: Select "Insert" (insert character at cursor location)
or "Overwrite" (write over character at cursor lo-
cation).
Turns on/off hyphenation at end of line.
Word Wrap:
Line No.: Turns line number display on or off.
Sets horizontal tab width; 2, 4 or 8 tabs per line.
Tab Width:
Select Telex (69 Fixed) or ASCII (40 to 80).
Column Width:
Selects cursor appearance, either
Cursor Type:
derline.
Reports Logs Options Setup
SYNC ( NCS )
NCS: POR LOGOUT
Position StopAlarm
97-08-07 09:04 (UTC)
LAT: 35:00.00N
LON:135:00.00E
(Block) or un-
3-3