Opening A File - Furuno FELCOM 12 Operator's Manual

Opening a File

3-10
The internal memory provides two working areas where you can load
one file each. Only one file can be displayed at a time, however you
can easily switch between files.
FLOPPY DISK MEMORY
FILE 1
FILE 2
FILE 3
Figure 3-18 Internal memory
Opening a file
1. Set the floppy disk containing the file you wish to open in the
disk drive.
2. Press [F1] to display the File menu.
3. Press [2]. The screen shows a list of the files stored in the floppy
disk.
4. Select a file.
To view a portion of a file, press the space bar.
File
1. New ALT-N
2. Open ALT-O
3. Close ALT-Q
THE FURUNO FELCOM 12 INMARSAT STANDARD C MOBILE EARTH STATION, A
4. Save ALT-S
SATELLITE COMMUNICATIONS UNIT PACKAGE FOR VIRTUALLY EVERY VESSEL.
UNITt
5. Delete ALT-D
6. Rename
7. Print ALT-P
8. Format Disk
9. MIME (Decode)
Figure 3-19 Partial view of a file
5. Press [Enter].
6. The message "Loading" appears on the screen during loading. A
few moments later the contents of the file appear on the screen
and the title bar shows the file name. You may repeat the above
procedure to load a second file into a working area.
INTERNAL MEMORY
two WORKING AREAs
1
2
Open
SEIZOU
LCD
Display
Can select one
for displaying.