Furuno FELCOM 12 Operator's Manual page 37

File Edit Transmit EGC
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
Current State: IDLE
DCE Ver **
2. Press [6] to display the Auto Mode Setup menu.
3. Press [ ] key to go to the Receive Alarm line.
4. Press [Enter] to open the selection window.
7. E-Mail Setup
8. Directories
9. Configuration
Figure 1-13 Auto mode setup menu
5. Press [ ] to select OFF.
Note: To silence the audible alarm given to an EGC distress or
urgent message from Distress Alert Unit (IC-302), follow
the above procedure. DO NOT press the DISTRESS button
on the IC-302 to silence the alarm; you will transmit own
ship's distress alert.
6. Press [Enter] to close the selection window.
7. Press [Esc] twice.
Reports Logs Options
SYNC ( NCS )
NCS: IOR LOGOUT
Figure 1-12 Setup menu
Setup
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Telex Msg Save
Auto EGC Msg Save
Data Report & Polling Print
Setup Position StopAlarm
97-08-04 01:42 (UTC)
OFF
ON ON
ON
OFF
OFF
ON
1-13