Logout - Furuno FELCOM 12 Operator's Manual

5. LOGIN begins and the screen should now look something like
Figure 2-17. The indication LOGIN appears in blinking reverse
video.
File Edit Transmit EGC
Options
Starting Login Process.
Press any key to escape.
LOGIN replaces IDLE.
Current State: LOGIN
CALLING
DCE Ver **
Figure 2-17 Appearance of display screen during login
6. When login is completed, "Successful login" appears. The com-
munication unit goes into Idle state, LOGIN stops blinking and
the ocean region you logged in with appears on the screen.
7. Press any key to return to the standby display.

Logout

1. Press [F7] to display the Options menu.
2. Press [2] to display the logout screen.
Note: The communication unit must be idle to logout. When it is
not idle, "Communication Unit is not IDLE now. Cannot
start logout." appears. Press any key to return to the standby
display. Wait until the communication unit becomes idle.
Reports Logs Options
Login
SYNC ( NCS )
NCS: IOR LOGIN
Setup Position StopAlarm
Blinking during login
97-08-04 02:02 (UTC)
LAT:
LON:
2-9