Manually Requesting Delivery Status - Furuno FELCOM 12 Operator's Manual

4-16
RSB: Retransmission still being attempted
TMD: Maximum number of addresses exceeded
UNK: Unknown status (for example when the Logical
channel number is zero)
Some LES do not use certain codes.
Note:

Manually requesting delivery status

You can request a LES for delivery status of a message you have
transmitted there within the past 24 hours.
1. Press [F3].
2. Press [3] to display the Request Delivery Status display.
No. Message File Station
01 ABC FURUNO
02 edit msg.002 FURUNO
Figure 4-24 Request delivery status display
3. Select a file.
4. Press [Enter]. A prompt asks you if you want to request delivery
status on that message.
No. Message File Station
01 ABC FURUNO
02 edit msg.002 FURUNO
Figure 4-25 Sample message file list
5. Press [Enter] to request status. "Request started" appears on the
display. (To cancel request, select "No" and press [Enter].)
6. "Press any key." appears on the display; press any key to return to
the standby display.
Several minutes later the reply from the LES appears in the Delivery
column of the Request Delivery Status screen.
Request Delivery Status
LES Priority Send Status
Perth Normal 97-11-06 16:10
Perth Normal
Request Delivery Status
LES Priority Send Status
Perth Normal 97-11-06 16:10
Perth Normal
Delivery
Delivery
Start
Yes No