Egc Setup - Furuno FELCOM 12 Operator's Manual

2-12

EGC setup

The FELCOM 12 receives EGC messages directed to its present po-
sition and Navarea without further programming. The EGC Setup
screen lets you select additional areas for which you wish to receive
messages and also the Navtex station and type of message for Coastal
Warning (NAVTEX Re-broadcast).
1. Press [F8] to display the Setup menu.
File Edit Transmit EGC
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
2. Press [5] to display the EGC Setup screen.
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
Figure 2-21 EGC setup screen
The cursor is on the Additional Position line, where you can enter
L/L position of an ocean region you want to receive broadcasts
for.
3. Press [Enter] to open the additional position window.
4. Enter positions as follows.
a) Enter latitude.
b) Enter [N] or [S].
c) Enter longitude.
d) Enter [E] or [W].
Reports Logs Options
Figure 2-20 Setup menu
EGC Setup
:
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
Setup Position StopAlarm
:
OFF
OFF
OFF
OFF