Login - Furuno FELCOM 12 Operator's Manual

2-8

Login

1. Confirm that "SYNC (NCS)" appears at the bottom of the screen.
2. Press [F7] to display the Options menu.
File Edit Transmit EGC
Options
1. Login
2. Logout
3. Abort
4. Select NCS
5. Ocean Region
6. Test
Current State: IDLE
DCE Ver **
Figure 2-15 Options menu
3. Press [1] to display the Login screen.
Options
The communication unit must be idle to login. When it is
Note:
not idle, "Communication Unit is not IDLE now. Cannot
start login." appears. Press any key to return to the standby
display. Wait until the communication unit becomes idle.
4. Press [Enter] to start login.
Reports Logs Options
SYNC ( NCS )
NCS: IOR LOGOUT
Login
Figure 2-16 Login screen
Setup Position StopAlarm
97-08-04 02:01 (UTC)
Start
No
Yes Yes