Advertisement
Quick Links
Download this manual
See also:
Operator's Manual
ECDIS FEA-2100/2105
ENC Chart (Japan Maritime Safety Agency）
・ Update chart before embarking on a voyage. Do not update charts during a voyage.
・ During updating, do not display the radar overlay screen or the route monitor screen.
Hangup may result. If hangup occurs, turn the power off and on again.
・ It takes about seven hours to update one zone. Plan accordingly.
[CHART PLAN] key
1. Preparation
[SENC Convent Settings]
Update Manual
[SELECT] key
ECDIS Keyboard
1. Press the [CHART PLAN] key.
The menu appears in the Information area at the
right side of the screen.
2. Rotate the trackball to place the cursor (arrow
mark) on [SENC Convert Settings] and press the
[SELECT] key.
The [SENC Convert Settings] window appears.
1
Trackball
Advertisement
Related Manuals for Furuno ECDIS FEA-2100
Summary of Contents for Furuno ECDIS FEA-2100
- Page 1 ECDIS FEA-2100/2105 ENC Chart (Japan Maritime Safety Agency） ・ Update chart before embarking on a voyage. Do not update charts during a voyage. ・ During updating, do not display the radar overlay screen or the route monitor screen. Hangup may result. If hangup occurs, turn the power off and on again.
- Page 2 Check box 2. Loading the catalogue chart to be updated from CD-ROM to ECDIS [by CD Catalogue] [Load] D draive [Load] button [Close] button 3. Check the box on [Automatic SENC conversion] and [Automatic Display Unit]. (Or confirm that the check marks are displayed.) To check the box, place the cursor on the box and press the [SELECT] key.
- Page 3 [ＯＫ] button [YES] button [Close] button [Load or View CD Catalogue] window 5. Place the cursor on an alphabet or number button and press the [SELECT] key. Repeat this to enter catalogue name. Set a name which is easy to understand. For example, if the issue date of the CD is March 11, 2003, name it as JP20030311.
- Page 4 3. Displaying the Catalogue Chart [Catalogue] [NAME] [Catalogue Charts] [Overview] [CD] Choose catalogue name. 1. Press the [CHART PLAN] key to display the menu. 2. Place the cursor on the [Catalogue] and press the [SELECT] key. 3. Check on the [Name] and [Catalogue charts] check boxes and select [CD] in the [View filters] window.
- Page 5 [Groups] button [Catalogue] window [NEW] button Enter group name. [OK] button 6. Set the chart group to update as follows. a. Place the cursor on the [Groups] button at the bottom of the [Catalogue] window and press the [SELECT] key. b.
- Page 6 [Add Frame] button [Save] button [Inside] [Group] window e. Place the cursor on the [Add Frame] button and press the [SELECT] key. f. Rotate the trackball to place the cursor inside the chart cell frame desired and press the [SELECT] key. Repeat this to select all desired areas.
- Page 7 4. Chart Conversion (from ENC format to SENC format) The chart data in a CD-ROM (ENC format) must be converted to SENC format in order to display it on the ECDIS. Note that the conversion takes several hours. [Load] [View loaded CD Catalogue] [Group Select] window [OK] button Group name ebtered.
- Page 8 [Missing only] check box Total numbers of Numbers of charts charts loaded 6. Place the cursor on the [Missing only] check box and press the [SELECT] key to display the check mark. 7. Place the cursor on the [Load] button and press the [SELECT] key.
- Page 9 [S57LOAD] window Chart cell number [No Base Cell available] [Update number is too low] [SENC CONVERT] window After loading all charts desired, the chart conversion (from ENC to SENC) automatically starts. 8. At this time, the message [No Base Cell available] and chart cell numbers are displayed in the [S57 LOAD] window.
- Page 10 [Error] List becomes blank after conversion is completed. [Conversion List] The error message may appear during conversion, however leave the message displayed until the conversion is completed. The list in the [Conversion List] becomes blank after conversion is completed. 10. Place the cursor on the [Close] button of the [SENC CONVERT], [Failed SENC conversions] and [Catalogue] and press the [SELECT] key to close the windows.