Combining Files; Deleting A File - Furuno FELCOM 12 Operator's Manual

Combining Files

Deleting a File

3-14
In the procedure below we'll combine file A and B.
1. Open file A.
2. Open file B. File B appears on the display.
3. Place the cursor at the beginning of the file. While pressing and
holding down [Shift] press [
can also select a portion of the file.)
4. Press [C] while holding down [Alt]. This places file B on the clip-
board.
5. Press [V] while holding down [Alt]. File B is erased and File A
appears on the display.
6. Press [ ] while holding down [Fn] followed by [Enter] to place
the cursor at the end of the file.
7. Press [Insert].
The file B is inserted at the end of the file A.
1. Press [F1] to display the File menu.
2. Press [5]. A list of files stored on the disk appears.
File
1. New
[B:\ABC28
2. Open
Filename
3. Close
ABC28
4. Save
ABC281 .
COIEKI .
5. Delete
6. Rename COMTEST.
E0970715.001
7. Print
E0970715.002
E0970715.003
8. Format Disk
E0970715.004
9. MIME (Decode)
75 Files exist
To View: SPACE Make Dir: INS
Figure 3-27 Sample delete screen
3. Select the file you want to delete. To verify the contents of that
file, tap the space bar.
] to highlight the entire file. (You
Delete
ALT-N
ALT-O
Size Date & Time
ALT-Q
. 901 97-07-28 20:53
ALT-S
901 97-07-28 20:54
42 97-07-15 02:13
ALT-D
42 97-07-14 05:42
868 97-07-15 02:33
ALT-P
372 97-07-15 02:52
6794 97-07-15 02:59
864 97-07-15 03:13
578560 bytes free
Remove Dir: DEL
]