Copying And Pasting Text - Furuno FELCOM 12 Operator's Manual

4. Press [1] to select Cut. The highlighted text is cut and the remain-
ing text is reformatted. If a mistake is made, you can immediately
restore the text by pressing [Insert].
5. To move text to a new location after it has been cut, place the
cursor at the exact spot in the message where the cut text is to
start. When the text cursor is placed correctly, press [F2] and then
[3] (Paste).

Copying and pasting text

1. Select the text you want to copy.
0001 THE FURUNO FELCOM 12 INMARSAT STANDARD C MOBILE EARTH STATION, A
0002 SATELLITE COMMUNICATIONS
---- * ---------+---------+---------+---------+---------+---------+---------<
ASCII 131 Char.
Figure 3-9 Appearance of highlighted text
2. Press [F2] to display the Edit menu.
3. Press [2] to select Copy. The text selected is copied to the internal
clipboard.
4. Place the cursor at the exact spot on the message where the cop-
ied text is to start.
0001 THE FURUNO FELCOM 12 INMARSAT STANDARD C MOBILE EARTH STATION, A
0002 SATELLITE COMMUNICATIONS
0003
Cursor
---- * ---------+---------+---------+---------+---------+---------+---------<
ASCII 131 Char.
Figure 3-10 Cursor selects location where to paste text
<[1] UNTITLED1>
UNIT PACKAGE FOR VIRTUALLY EVERY VESSEL.t
[ Line 2/ 2 Col.
<[1] UNTITLED1>
UNIT PACKAGE FOR VIRTUALLY EVERY VESSEL.t
[ Line 2/ 2 Col.
66 ] [Insert ]
66 ] [Insert ]
3-5