Editing Waypoint Data - Furuno NAVNET 1734C Operator's Manual

3. PLOTTER OPERATION
ABALONE
00:00 01JAN01
35 47.010'N
135 21.000'W
CRAB
00:00 01JAN01
34 42.000'N
135 21.050'W
FISH
00:00 01JAN01
34 41.000'N
135 21.030'W
LOBSTER
00:00 01JAN01
38 44.300'N
135 21.010'W
PUSH ENTER KNOB TO
SEARCH FOR
Alphanumeric waypoint list
4. Press the NEW WPT soft key to show the waypoint window (see the figure on the
previous page). Own ship position is shown in the position box.
5. Select the position box and enter position desired.
6. If desired, change waypoint data following the instructions from step 6 in "Entering a
waypoint with the cursor" on page 3-28.
7. Press the SAVE soft key to register the waypoint.
8. Press the MENU key to close the menu.

3.8.2 Editing waypoint data

Waypoint data may be edited from the waypoint list or directly from the plotter display.
Editing waypoint data from the waypoint list
1. Press the MENU key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST or ALPHANUMERIC LIST soft key as appropriate.
4. Use the Cursor pad to select the waypoint you want to edit.
5. Press the EDIT WPT soft key.
6. Edit data as appropriate.
7. Press the SAVE soft key.
8. Press the MENU key to close the menu.
3-30
WPT
ALPHA
GOTO
350.9
3.80 nm
NEW
WPT
050.9
1.98 nm
EDIT
WPT
065.9
ERASE
1.83 nm
WPT
RETURN
144.9
4.93nm
---
Alphanumeric and local waypoint lists
FISH
00:00 01JAN01
065.9
34 41.000'N
1.83 nm
135 21.030'W
CRAB
00:00 01JAN01
34 42.000'N
050.9
135 21.050'W
1.98 nm
ABALONE
00:00 01JAN01
350.9
35 47.010'N
3.80 nm
135 21.000'W
LOBSTER
00:00 01JAN01
144.9
38 44.300'N
4.93nm
135 21.010'W
Local waypoint list
WPT
LOCAL
GOTO
NEW
WPT
EDIT
WPT
ERASE
WPT
RETURN