Programming Egc Channels - Furuno FELCOM 12 Operator's Manual

21. Press [Esc] to open the update window.
Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages
Figure 2-26 EGC setup screen, update window
22. Press [Enter] to select "Yes" and register all EGC settings.
23. Press [Esc] to return to the standby display.

Programming EGC channels

The EGC Channel List in the Setup menu stores EGC channels.
There are currently four EGC channels, one for each satellite. These
four channels are pre-programmed into the unit and marked in the
EGC Channel List with asterisks. When more EGC channels become
available you can add them to the list.
1. Press [F8] to display the Setup menu.
2. Press [9] to display the Configuration menu.
3. Press [3] to display the EGC Channel List.
File Edit Transmit EGC
Setup
Configuration
EGC Channel List
ENT: set ESC: quit
11080* 12580*
Figure 2-27 EGC channel list
4. Current EGC channels are marked with an asterisk. These chan-
nels cannot be changed.
5. With the arrow keys place the cursor where there is no data en-
tered.
EGC Setup
:
OFF
OFF OMEGA messages
OFF SATNAV messages
OFF Other navaid msg
OFF QRU (no message)
OFF
Reports Logs Options
10840* 11088*
:
OFF
Update OFF
OFF
Yes OFF No
Setup Position StopAlarm
2-15