B. Installation (to copying
machine)
1) Remove both top and bottom cassettes, and
remove the front cover, front lower cover, and
rear cover.
Rear cover
Front lower cover
2) Disconnect the connector for the heater from
the copier's rear, and remove the connector
support member.
COPYRIGHT © 1998 CANON INC.
Front cover
Figure 5-602
Connector
Figure 5-603
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
3) Install the mounting plate 1 to the cassette
heater with two screws (black; M4 6).
Cassette heater
4) Remove the screw, and remove the connector
cover of the cassette heater.
Support
member
INSTALLATION
Mounting plate 1
Figure 5-604
Connector cover
Screw
Figure 5-605
Screws
5–17