Table of Contents
Advertisement
8) Push the thermal switch
arrow, and remove it.
5
Figure 4-708
9) Remove the screw
plate
.
6
Figure 4-709
10) Remove the screw
mistor
.
Figure 4-710
COPYRIGHT © 1998 CANON INC.
in the direction of the
, and remove the metal
7
, and remove the ther-
9
8
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
11) Remove the E-ring
the bush
and the bearing
upper roller.
10
11
Figure 4-711
12) Remove the three E-rings
pull out the gear
Figure 4-712
4. Points to Note after Replacing the
Upper Fixing Unit
• If you have replaced the upper fixing unit, you
must enter the temperature adjustment in
service mode No. 304. (See the Service
Handbook.)
Caution:
Do not touch the surface of the heater.
MECHANICAL SYSTEM
at the front, and remove
; then, pull out the
12
at the rear, and
and the bush
.
15 14
13 13 13
4–47
Advertisement
Chapters
Table of Contents
