Canon NP6621 Service Manual page 210

MECHANICAL SYSTEM
3. Points to Note When Installing the
Multifeeder Pick-Up Roller
When installing the multifeeder pick-up roller
make sure that the side with a cross
is toward the rear.
2
1
Figure 4-313
4. Removing the Separation Pad
1) Open the upper right door.
2) Remove the two screws
separation pad .
Caution:
Take care so that the spring on the separation
pad assembly will not fly off.
1
Figure 4-314
4–18
,
on the collar
(front of copier)
, and remove the
2
COPYRIGHT © 1998 CANON INC.
5. Removing the Multifeeder Spring
Clutch
1) Remove the upper rear cover and the lower rear
cover.
2) Remove the three screws
guide .
2
1
Figure 4-315
3) Remove the main motor. (See "Removing the
Main Motor.")
4) Remove the three screws
clutch stop plate
7
3
Figure 4-316
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and shift the cord
1
, then, remove the
and the clutche .
6
3