The Machine Connected Via Wsd Port Is Not Displayed During Driver Installation - Canon imageCLASS LBP122dw User Manual

The Machine Connected via WSD Port Is Not Displayed
During Driver Installation
Troubleshoot by checking the items below.
Check the Settings of the Machine.
Configure the settings below if they have not been configured.
The machine must be restarted to apply the settings.
WSD Printing and Multicast Discovery Settings
Log in to Remote UI in System Manager Mode
Settings] [Edit]
the machine.
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the
settings. [WSD Settings](P. 214)
Check the OS Network Settings.
Configure the settings below if they have not been configured.
In Windows, click [
properties] [Network profile]
Check Whether the Driver Is Installed.
Use the following procedure to check whether the driver of the machine is displayed.
In Windows, click [
driver is displayed.
If the driver is displayed, it is installed. In this case, uninstall the driver, and then reinstall it.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
Troubleshooting
select the [Use WSD Printing] and [Use Multicast Discovery] checkboxes
] (Start) [ ] (Settings)
[Private]
] (Start) [ ] (Settings)
[Settings/Registration]
[Network & Internet]
[Devices] [Printers & scanners]
304
[Network Settings] [WSD
[OK]
[Status] [Change connection
check whether the
94RC-09E
restart