Counter - Canon NP6621 Service Manual

MECHANICAL SYSTEM
E. Counter*
* This may not be available for sale in same areas.
1. Installing the Option Counter (CNT2)
1) Open the top body.
2) Remove the inside upper cover.
3) Remove the two screws
connector ; then, remove the counter mount
.
1
2
Figure 4-114
4) Put the option counter
4
Figure 4-115
SW303
ON
ON
ON
ON
4–4
, and disconnect the
3
in the counter mount.

Counter

2
Large size copy counter
OFF
1
2
Duplexing unit counter
OFF
1
2
Small size copy counter
OFF
1
2 No counter
OFF
1
Table 4-101
COPYRIGHT © 1998 CANON INC.
5) Install the counter mount to the copier with two
screws.
6) Connect the two connectors
Figure 4-116
7) Set SW303 on the DC controller as indicated in
Table 4-101.
Description
SW303 settings determines
how the option counter (CNT2)
behaves.
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
of the counter.
5